Valve-type Impeller Packer is specially designed, unique, impeller type bag filling machine to pack any powder material.
Types of casing:– Hard & NormalBag Applications:- Valve TypeType of weighing:- GrossNo. of Spout:– Up to FourCapacity of Machine:- 25kg & 50 kgOutput of Machine:- Approx. 300 Bags/Hour/SpoutMaterial:- Cement, Dry Mix Mortar/Plaster, Silica Sand, Lime Powder, Gypsum, Dry Mix, Plaster, Fly Ash, etc.Application Area:- Construction IndustryThe VT CORP Electronic Packer Model “VTC-VIP” is a stationary valve type bag filling machine for packing easy-flowing powdery bulk materials into valve bags with a simultaneous weighing of the bulk material from 20 to 50 Kg. The bulk material is passed through a filling impeller into a valve bag with coarse and fine flow control. Simultaneous weighing of the filling process (gross system) ensures very high output of each filling station. The machine comes with a bag resting on a saddle during filling. It is therefore possible to use paper bags with only two layers without special valve reinforcement.
We created a microprocessor-based controller for filling and weighing units on packers, and as the first to launch the electronic stationary packer, we have played a significant role in that evolution.
Microprocessor-based stationary impeller packer.Fully automatic Filling & Weighing.Digital weighing system with indicator.Latest technology and user-friendly designs.Two stages of filling of the material inside the bag ensure better accuracy in weighments.Uses pre-stitched valve-type bags. Hence, no stitching is required after the bags are filled.The same machine can be used for packing cement in jute, HDPE (woven), or paper bags (non-laminated).Available in 1 to 4 filling spouts in the stationary model.Easy availability of spares and after-sales service.| Model | VIP 2.1 | VIP 2.2 | VIP 2.3 | VIP 2.4 | VIP 3.1 |
|---|---|---|---|---|---|
| No. of Spouts | 1 | 2 | 3 | 4 | 1 |
| Impeller Type | Vertical | Vertical | Vertical | Vertical | Horizontal |
| Feed Rate (bags/hour) | 300 | 600 | 900 | 1200 | 300 |
| Filling Speed (MT/Hour/Spout) | 15 Tons | ||||
| Approx. Bag Dimension for 50Kg (mm) | 750mm × 500mm × 100mm | ||||
| Bag Type | Valve Type | ||||
| Bag Material | HDPE, Paper, Jute, etc. | ||||
| Filled Weight (Kg) | 20~50 | ||||
| Accuracy in 50Kg Bag | ±0.4% to ±0.5% | ||||
| Material Can Be Packed | Powder (Building Material & Chemical) like Cement, Fly Ash, Ready Mix, Wall Putty, Gypsum, Chemicals etc. | ||||
| Bulk Density of Material (Tons/m3) | 0.8 to 1.4 | ||||
| Power Supply | 380 / 440 VAC 3φ @50Hz | ||||
| Air consumption for Single Spout | 10 CFM @100 PSI | ||||
| Approx. Machine Dimension of Single Spout (LxBxH) | 750 mm X 1230 mm X 1920 mm | ||||
| After Sales Service & Spare Part Availability | Yes | ||||
All the above details are w.r.t to Cement with a bulk density of 1.2 T/m 3 or g/cc packed in 50Kg bag.Support of the customer does not end once the equipment is sold. It is the beginning. With after-sales support being the cornerstone of our business philosophy, we offer prompt and efficient after-sales service.
