"VTC-VIP” is a stationary valve type bag filling machine for packing easy-flowing powdery bulk materials into valve bags with a simultaneous weighing of the bulk material from 20 to 50 Kg.
Feed Rate: Bags/Hr/SpoutBag Type: Valve Type & Open MouthPacking Range: 20 to 50 KgAccuracy in 50 Kg Bag: ±100g Clean and dust free operation Advanced Touch screen HMI based interface with a dedicated microcontroller for enhanced accuracy, paired with a microprocessor Fully automatic Filling & Weighing with Digital weighing indicator Two stages of filling of the material inside the bag ensure better accuracy in weighments Upgraded Load Cell Inflatable Sleeve is introduced for bag gripping on the filling spout which also helps in preventing back pressure Uses pre-stitched valve-type bags, eliminating the need for post-filling stitching, and is compatible for packing powder in HDPE (woven), or paper bags Available in 1 to 4 filling spouts in the stationary model and 6-16 filling spouts in Rotary packer Easy availability of spares and after-sales service
| Model | VIP 3.1 | VIP 3.2 | VIP 3.3 | VIP 3.4 |
|---|---|---|---|---|
| No. Of Spouts | 1 | 2 | 3 | 4 |
| Impeller Type | Vertical | Vertical | Vertical | Vertical |
| Feed Rate (Bags/hour) | 300 | 600 | 900 | 1200 |
| Filling Speed Tons/Hour/Spout | 10-15 Tons | |||
| Bag Type | Valve Type | |||
| Bag Material | HDPE, Paper etc | |||
| Material Can Be Packed | Powder (Building Material & chemicals) like Cement, Fly Ash, Ready Mix, Wall Putty, Gypsum, Chemicals, Mortar etc | |||
| Power Supply | 380/440 VAC 3Ø @50Hz | |||
| Air consumption for Single Spout | 10 CFM @100 PSI Per Spout | |||
| Approx. Machine Dimension of Single Spout (LWH) | 750mm X 1230mm X 2500mm | |||
